Expand RAID 5 Partition for Windows SBS 2011 with AMEI Partition Assistant Server

In Windows SBS 2011, 2008, 2003, if the space of RAID 5 partition is not enough, it will lead server to run slowly, how to solve it? Expanding partition becomes very important.

December 23, 2014

Expand RAID 5 Partition Windows SBS 2011 with AMEI Partition Assistant Server

Overview of RAID 5

RAID is short for Redundant Array of Independent Disks, originally called Redundant Array of Inexpensive Disks. The basic idea is to combine a number of relatively inexpensive hard disks together to become a hard disk arrays and make the performance be same as, or even better than an expensive, large capacity hard disk. Simply put, RAID is to assemble a multi block independent disks (hard disk) according to different ways to form a disk group (logical hard disk). It can provide higher storage performance and data backup technology than the single disk. Disk array can be combined in different ways, so we called it RAID Levels which can be divided RAID-0, RAID-1, RAID-1E, RAID-5, RAID-6, RAID-7, RAID-10, RAID-50, and RAID-60. Among them, RAID 0, RAID 1 and RAID 5 are common.

RAID5 refers to independent distributed parity disk structure. Under commercial application environment, RAID5 is a most widespread RAID level. The biggest characteristic of RAID5 is hard disk redundancy. RAID5 requires 3 or more than 3 hard disks, and unilization ratio is N-1 of storage space. For RAID 5, the parity check codes exist in all disks, its readout efficiency and write efficiency are high, and block type collective access efficiency is also good. Due to the feature, data security reliability improves and allows a single disk to go wrong. For RAID, it is based on the data of the parity bit to ensure the security of data by storing alternately the parity bit in each hard disk. In this way, if any hard disk damage, you can reconstruct the corrupted data based on the parity bit of other drives.

Expand RAID 5 Partition Windows SBS 2011 to Solve Low Space

On Windows SBS 2011, if RAID 5 partition space is not enough along with data increase, how will you do? Maybe someone will repartition RAID 5 array, but it is quiet time-consuming and complicated because there are at least 3 hard disks. The most effective way is using AOMEI Partition Assistant Server to expand RAID 5 partition in Windows SBS 2011. It supports to resize, split, move, and extend partition for managing disk and partition safely and quickly. Here are some steps to help you expand RAID 5 partition.

Step 1: Launch AOMEI Partition Assistant Server, then choose a partition to right click and select “Resize Partition”. Here resizing I drive as an example.

main interface

Step 2: Then drag the slider like the screenshot to allocate some space before I partition.


Step 3: Then you will see there is some unallocated space behind the partition which need to expand.

unallocated space

Step 4: Resize the partition which is running out of space, and right drag the slider, and then click “Ok”.

increase space

Step 5: Then click “Apply”, and you will see the partition has been expanded.


In a word, in fact, it is easy for users to expand RAID 5 Partition Windows SBS 2011 under AOMEI Partition Assistant Server. No matter in SBS 2011, 2003, 2008, or all PCs and Servers, the software is a good assistant. After resizing partition, your computer will runs quickly on RAID 5 array in Windows SBS 2011.


  • If there is no space on the virtual partitions of RAID 5 array, you should add a new disk to the RAID array. Then you can allocate space to resize partition.
  • During resizing partition, not allow to break RAID 5 array, and you can resize partition just like on a physical disk.