A Disk Read Error Occurred in HP Computer [Solved]

August 30, 2018

Failed to boot up HP computer running Windows 7/8/10 with the message – A disk read error occurred? This article will analyze the possible reasons and offer practical solutions.

My HP laptop says “A disk error occurred”

“Hi, I have a problem with my HP computer that running Windows 7. Whenever I boot up it, I see a black screen with the message – A disk read error occurred Press Crtl + Alt + Del to restart appearing. I have never encountered such problem and don’t know what to do. Is there any advice? Thanks!”

Reasons account for the error

To fix “A disk error occurred” in HP laptop or desktop accordingly and effectively, it is necessary to realize the possible reasons for this error and the main elements are concluded as follows:

  • The BIOS is outdated.

  • There is something wrong with the BIOS settings.

  • The hard drive cables are failing.

  • There are bad sectors on the hard drive.

  • The MBR of the hard drive that holds operating system is corrupted.

Solutions for A disk error occurred

As you have realized the possible reasons of “A disk error occurred” in HP, it is time to learn how to solve this problem. Here four valid ways are listed.

Solution 1. Update the BIOS version

Outdated BISO can cause “A disk read error occurred”. At this time, you can upgrade the BIOS to the current version: Download the latest BIOS version from the manufacturer website to a bootable device > install the BIOS for your HP computer from the bootable device. After that, reboot your HP computer to see whether the error disappears.

Solution 2. Reset the BIOS settings

This way can be applied when the error is caused by BIOS settings issues. Here are detailed steps:

1. Restart your HP laptop or desktop.

2. Enter BIOS Setup menu by pressing certain key as the prompt.

3. On the BIOS Setup screen, choose and load the BIOS Setup Default settings by pressing certain key.

4. Save changes and follow the prompt to restart the computer.

Solution 3. Check hard drive cables

A disk error occurred in Windows 7 can be a result of failing hard drive cables, thus you can check the hard drive cables to see if there is a loose cable connections, if the power cable is worn out. If not, you can connect the cables to different ports to see whether the ports are damaged. If the ports and cables are OK but the error still exists, it is time to consider whether there is a problem with the hard drive.

Solution 4. Repair Master Boot Record (MBR)

When the error in HP is caused by corrupted MBR, you can rebuild MBR to fix this error. Here two ways are offered and you can choose one based on your specific situation.

#1. Fix MBR on Windows 7 from Command Prompt

If you are with Windows Installation CD/DVD, you can boot from it, enter Recovery Console and go to Command Prompt. Then, run the following commands:

  • bootrec /fixmbr

  • bootrec /fixboot

  • bootrec /scanos

  • bootrec /rebuildbcd

#2. Rebuild MBR via AOMEI Partition Assistant

When you are no Windows CD/DVD, you can turn to AOMEI Partition Assistant, which enables you to fix MBR simply. Let’s see how it works:

First of all, create a bootable USB drive with AOMEI Partition Assistant in a working computer. Then, follow the steps below:

Step 1. Insert the bootable media created by AOMEI Partition Assistant to the unbootable HP computer and boot from it.

A Disk Error Occurred HP

Step 2.In the main interface of AOMEI Partition Assistant, right click the disk needs repairing and choose “Rebuild MBR”.

Rebuild MBR Windows 7

Step 3. Click “Apply” > “Proceed”>“Yes” to perform your operation.

Solution 5. Check hard drive for bad sectors

When the system disk is with bad sectors, the “a disk read error occurred” message can show up as well. If so, you can use AOMEI Partition Assistant to check the hard drive for bad sectors. Start with following steps:

Step 1. Boot from the bootable media created by AOMEI Partition Assistant or remove the hard drive from the unbootable computer and connect it to a working computer and run AOMEI Partition Assistant.

Step 2. In the main interface of OAMEI Partition Assistant, right click the disk needs testing and choose “Surface Test”.

Surface Test

Step 3. Tick “Quick Check” and click “Start” to check.

Start Test

PS.: When there is a bad sector on the hard drive, it might be marked as red box.

Wrap things up

When you encounter “A disk error occurred” in HP laptop or desktop, you can figure out the reason of this error at first and then take solutions accordingly. If necessary, you can ask the help of third party disk manager– AOMEI Partition Assistant. Apart from rebuilding MBR and test hard drive, it enjoys many other useful functionslike migrating OS to SSD, copying hard drive and so on.