Can’t Copy Files from USB to PC – What Should I Do?

February 19, 2019

You might be unable to copy files from USB to PC out of various reasons like lacking administrator permission, non-accessible USB and so on. And you can get quick solutions in this article.

Can’t copy files from USB flash drive to PC

“My computer is running Windows 10. I backed up some important files from my PC to a USB flash drive. Recently, I need to copy these files from USB to my laptop but I only received the error message: “You’ll need to provide administrator permission to copy this file”. What the means that I need to provide administrator permission? Why Can’t I copy files from USB flash drive to my laptops? Is there any advice? Thanks for your help!”

Ned to Provide Administrator Permission to Copy This File

In fact, there are many factors that can cause the “can’t copy files from USB to PC” problem.

Corresponding fixes under different situations

Common reasons for failure of copying files from USB to PC and specific solutions will be presented in the following content.

Situation 1: You’ll need to provide administrator permission…

If you have received such error, the problem might be with Security settings on the USB drive. At this time, do as the following steps to give permission to copy files and folders (Supposed that the USB drive is connected a computer running Windows 10).

1. Open File Explorer, locate the USB drive and right click it. Then choose Prosperities.

2. In the pop-up window, navigate to “Prosperities” > “Security” > “Edit”.

3. In the pop-up window, click “Add” button and write your User name in the appearing empty box. Then, click “Check Names” button.

4. Select your User name under the Group or user name section and allow “Full control”. Then, click “Apply”.

Situation 2: Access is denied on USB flash drive.

Or you even cannot open USB flash drive and receive the message saying that the drive is not accessible. Access is denied. How can you copy files from it even you can’t open the USB drive? This issue can be simply caused because you don’t have the privilege of accessing to the partition. You can get permission to the files on the USB drive by following the steps presented in the previous paragraph.

Access Is Denied

Situation 3: The Parameter is Incorrect

Or you just get the message “F:\ is not accessible, the parameter is incorrect,” or Partition is not accessible, the file or directory is corrupted and unreadable when you try to open the USB drive. Here you can try to fix this issue by running CHKDSK utility:

1. In the Search box, input “Command Prompt”, right click Command Prompt and choose “Run as administrator”.

2. In the Command Prompt window, type “chkdsk n: /f”, where “n” refers to the drive letter assigned to the partition on the USB. Then, hit “Enter” key.

3. Restart the computer to check whether you can open the USB drive to copy files from it to your computer.

Situation 4: File is too large for the destination file system

It is possible that you can’t copy files to PC because the file system of the destination partition. If the partition that you need to copy USB files to is formatted with FAT32, it is not available to save individual file large than 4GB to it. In such circumstance, you can format the partition to NTFS to fix the issue using Disk Management. Here are detailed steps.

1. Press Windows + R simultaneously, input diskmgmt.msc and hit Enter to access Disk Management and do as the following steps:

2. Right click the partition that you need to convert and select “Format…”.

3. In the pop-up window, choose NTFS file system and click “OK”.

Within few seconds, the partition will be formatted as NTFS file system. What you should pay attention is that formatting will make you all data on the partition. If you don’t want to lose the data, you can convert FAT32 to NTFS via CMD without formatting by following the steps presented in the next:

Run Command Prompt as administrator and type “convert f: /fs:ntfs, where " is the drive letter assigned to the partition that need converting.

Convert FAT32 NTFS

A Simpler to copy files on USB drive to PC

Having realized how to “fix can’t copy file from USB to PC” issue, it is time to realize an easier way to move all files on the USB to your laptop or desktop – copy USB drive via third party disk cloning software like AOMEI Partition Assistant. Let’s see how it works.

Step 1. Connect your USB drive to your PC; download, install and run AOMEI Partition Assistant. In the main user interface, choose “Partition Copy Wizard”from "All Tools". Then, select “Copy Partition Quickly”and click "Next".

Select Copy Method

Step 2. Select the partition on the USB drive as the source partition; then select an unallocated on the PC hard drive as the destination place space.

PS.: If there is no unallocated space, you can shrink partition to get unallocated space.

Step 3. You can adjust the size of the partition being created. Then, click “Finish”.

Step 4. Check and confirm the operation. Then, click “Apply” > “Proceed” to execute the operation.

After a while, you can clone the USB drive successfully under the help of AOMEI Partition Assistant. What’s more, it is enjoys many other helpful functions. For instance, it allows you to copy disk and migrate OS to new hard drive.