Diskpart: Format FAT32 via Command Line in Windows 10/8/7

September 19, 2018

In this article, we will show how to use Diskpart to format FAT32, and introduce a great Diskpart alternative for the situation where you failed to format an over 32GB large drive to FAT32 in cmd.

Need to format hard drive to FAT32

No matter you are using a pendrive, SD card, USB flash drive, SSD or other external hard drives to store your data, you will need to format it to FAT32 in the following situations.

  • If you plan to use the disk on PS3, Xbox or some other games consoles that only supports FAT32 file system, then you will need to format the disk to FAT32.

  • If you want your device to be compatible with more operating systems, like Mac, Linux and some other older versions of Windows including Windows 98, Windows XP, Windows Server 2003, etc, the FAT32 is the best choice.

  • If you need to connect your hard drive to a NAS device, but the NTFS won't allow the NAS device to access the drive, then you need to format or convert NTFS to FAT32.

Diskpart format hard drive to FAT32 in Windows 10/8/7

Usually, you can format a disk to FAT32 through File Explorer and Disk Management. However, if you fails to format hard drive to FAT32 successfully via these two built-in tools and receive formatting errors like "Windows was unable to complete the format" or "The format did not complete successfully", you can turn to DiskPart.exe tool. The steps below show you how to format disk to FAT32 via Diskpart command line. You will need local administrator access on the computer to follow these steps.

Warning: formatting process means data loss, so back up everything important before proceeding.

Step 1. On your keyboard, press the "Windows + R" at the same time to open "Run" Window, then type "Diskpart" and click "OK"(click Yes if prompted by the User Access Control).

Step 2. DISKPART will open in a command prompt window.

Step 3. Type "list disk" and hit "Enter": to see all disks connected to your computer, and you need to identify which drive needs to be formatted by size, here we will choose disk 1 as an example.

Step 4. Type "select disk 1" and hit "Enter", then the command prompt will display a message "Disk 1 is now the selected disk".

Step 5. Type "list partition" and press "Enter" to list all partitions on the disk.

Step 6. Type "select partition X" and press "Enter", X refers the partition number that you need to format. Here we choose partition 1, then the command prompt will display a message "partition 1 is now the selected partition".

Step 7. Now input the commands "format fs=fat32" and press "Enter".

Diskpart Format FAT32

If the disk is set to be write-protected, you need to run extra different commands to format it to FAT32 via DiskPart.

"list disk >select disk 1 >attributes disk clear readonly >clean >create partition primary >format fs=fat32"

Then you can format write-protected disk using DiskPart with a success.

Diskpart format FAT32 failed

Although DiskPart is a great choice when Windows Disk Management and File Explorer fails to format hard drive to FAT32, it also shares a same limitation with the other two tools that they cannot format a large drive (over 32GB) to FAT32. When you try to perform such formatting task in Diskpart, you will receive an error message saying "The volume size is too big for FAT32"(as shown in the below screenshot).

Volume Too Big

A great DiskPart alternative you can try

When you meet the above-described error message or you are not an expert at running such complicated commands, you can search for a DiskPart alternative to easily format hard drive to FAT32. We highly recommend AOMEI Partition Assistant Standard. It is easy to use no matter you are either a computer expert or a newbie. It can help format a large hard drive (over 32GB) to FAT32 in below three steps.

Step 1. Download the free software. Install and launch it. Right click the disk partition you want to format as FAT32 and choose "Format Partition". Here we choose a 120GB drive.

Format Partition

Step 2. Select "FAT32" as the file system and click "OK".

FAT32

Step 3. Back to the main interface, click "Apply" to actually begin formatting the disk.

Apply

So, when Diskpart format FAT32 disappoints you, AOMEI Partition Assistant Standard can be a great alternative. It can format write protected disk directly. Moreover, its "NTFS to FAT32 Converter" allows you to convert file systems between FAT32 and NTFS without formatting or losing data.

If you upgrade to Professional version, more advanced functions will be available, including converting boot disk between MBR and GPT without losing data, recovering lost partitions, cloning MBR disk to GPT and vice versa.