How to Blank a Hard Drive Permanently?

August 30, 2018

This article shows you how to blank a hard drive totally and irrevocably with the help of disk wipe tool – AOMEI Partition Assistant. Read it and follow the steps to wipe data on hard drive.

When do you need to blank hard drive irrevocably?

It is rather common that computer users want to blank a hard drive completely after using it for long time. And the situations need to wipe a hard drive totally are concluded as follows:

  • Reuse a hard drive: It is possible that you receive a used hard drive and want to use it again. In such circumstance, in order to get better performance and make a fresh Windows install on the hard drive, you can choose to wipe all the data on the hard drive permanently.

  • Selling or donating a hard drive: After upgrading hard drive to larger HDD or SSD, you might need to sell the old hard drive or give it away to your friend. Either way, in order to prevent your personal information such as phone numbers or website password being known by the buyer or your friend, you need to clean all the data on the hard drive permanently and completely.

How to blank a hard drive permanently?

It’s non-viable to blank a disk totally and permanently only through formatting disk or delete all partitions on the hard drive. Actually, all the data on the disk are just been hidden and not recognized by your computer after formation and deletion. But these missing data still exist on the hard drive and can be easily recovered by file recovery software. Well, how to blank a hard drive completely? A good disk wipe tool like AOMIE Partition Assistant can be your solution. AOMEI Partition Assistant enjoys differential data wipe modes, designed for SSD and HDD respectively, considering that differences between HDD and SSD. Thus, you can use it to blank your disk permanently whether it is HDD or SSD.

Blank an HDD irrevocably via disk wipe software

At first, you should download AOMEI Partition Assistant and connect your HDD to a working computer. Then, you can follow the steps below (Take wiping hard drive in Windows 10 as an example):

Step 1. Run AOMEI Partition Assistant. Right click the hard drive that you need to blank and select “Wipe Hard Drive”.

How to Blank a Hard Drive HDD

Step 2. Determine the number of times to wipe hard drive in the pop-up window. Then, click "OK".

Specify the Number of Times

Step 3. Return to the main user interface, check the pending operation and click “Apply”.

Then, you will wipe an HDD successfully and completely.

Apply Blank HDD

Notices:

  • It could be a long time to wipe hard drive and your data are unable to be recovered after this operation.

  • If you want to wipe a system disk and the system is running, you need create a bootable device, boot from the device, and then wipe the disk in Windows PE.

Blank an SSD permanently via SSD erase tool

As what have been mentioned above, AOMEI Partition Assistant offers a way differ from the way to erase data on HDD. This disk wipe tool allows you to secure erase SSD in Windows 7 to blank all data on SSD and restore SSD to its peak performance. Step-by-step instruction is listed as follows:

Step 1. Hook up your SSD to a computer running Windows 7 and ensure that it can be detected by your OS.

Step 2. Run AOMEI Partition Assistant, right click the disk that you need to securely erase and choose "SSD Secure Erase".

Blank SSD

Step 3. You will receive a secure erase notice saying that this operation will cause loss of all the data On SSD. Back up your important data before securely erase SSD. Click on “Next” button.

Secure Erase Notice

Step 4. Select the SSD that you want to wipe all data permanently and click “Next”.

Choose SSD

Step 5. There are chances that you will be trapped in the situation that your SSD is in a frozen state. At this point, you need to make hot swap to unfreeze the SSD.

Frozen SSD

The tutorial to make hot swap:

  1. Open case, rear cover or drive shell and locate the position of the SSD that you need to erase.

  2. Disconnect the power cable and SATA data cable form SSD in order.

  3. After a few seconds, plug the SATA data cable to the SATA port, and then reconnect the power cable.

Step 6. After that, this operation will move on. Click “Finish” when you receive the message that SSD Secure Erase has been completed successfully.

Manage to Secure Erase SSD

Notices:

  • It is available to upgrade AOMEI Partition Assistant to professional version to get more useful functions like migrating OS from MBR to GPT disk, converting dynamic disk to basic without data loss and so on.

  • It is not advised to securely erase SSD frequently as this operation will affect its lift while improving its performance.

Conclusion

According to what described above, you can realize how to blank a hard drive permanently without any efforts. The whole process can be divided into three stages: Find out a proper disk wipe tool – figure out what type your disk – apply corresponding measure to blank your disk.