By Bryce / Last Updated August 19, 2019

Why not replace desktop HDD with SSD?

Are you fed up with the low boot speed of your computer? Are you tired of the long wait of loading game? If you want to change this bothering situation, it is highly recommended to replace the original HDD with SSD in your desktop or laptop. After changing from HDD to SSD, you are able to make use of SSD’s advantages listed below:

  • Lower power consumption – There is no motor on SSD; therefore the power consumption of Solid-state Drive is less than Hard Disk Drive.

  • Faster data access – Without the seek process, SSD can read data faster than HDD. When your desktop or laptop HDD is replaced with an SSD, it is with higher speed when booting up operating system or running installed applications.

  • Without moving parts –SSD has no moving parts (Except some SSDs are attached with cooling fans). Therefore, SSD makes no noise and is not easily to be affected by some accidents such as falling down or colliding with other objects.

The simplest way to replace HDD without reinstalling Windows

In consideration of all benefits of SSD, it is a fairly wise decision to switch your desktop from HDD to SSD. However, what should you do to keep all data on the original hard drive while replacing HDD with SSD? It’s time-consuming and energy-wasting to reinstall Windows system and re-configure all settings. It’s not simple to make an image of OS drive and restore it on SSD via Windows snap-in tool as well. At this point, you can apply third party disk cloning software to clone HDD to SSD on desktop.

Among various utilities that can copy content on HDD to SSD, AOMEI Partition Assistant Professional definitely will be my first option. Enjoying two different copy methods, allowing you to clone hard drive to smaller SSD or clone hard drive with BitLocker encrypted. Apart cloning entire hard drive to SSD, it can clone OS related partitions only or copy certain specific partition like Recovery partition to SSD. What’s more, it is capable of allows you to align SSD partitions to improve the performance of SSD and do SSD Secure Erase to recover the lost speed of SSD.

How to replace SSD with HDD on desktop?

To replace hard drive without reinstalling Windows and all other applications, make preparations at first:

  • Select a proper SSD. The selected SSD should be suitable for your desktop and the size of it shall be not smaller than the used space of HDD. If SSD is not big enough to hold all data on old disk, take migrating OS to SSD into consideration.

  • Turn off your computer and install SSD in your desktop and make sure that it can be detected by operating system.

  • Defrag HDD and delete unnecessary files on the HDD to decrease the time of cloning process.

Then, follow listed steps to clone HDD to SSD in Windows 10/8/7.

Step 1. Install and fire up the software. Choose All Tools under Wizards and Disk Copy Wizard.

Clone System Disk

Step 2. Choose one way to copy disk.

Clone System Disk QuicklyTwo ways to copy HDD:

  • Disk Copy Quickly” (recommended) –This method only copy the used space on the HDD to SSD. It permits you to adjust partition size during the cloning process. This way allows you to clone HDD to smaller SSD provided that the size of SSD is larger than the used space of HDD.

  • Sector-by-Sector Copy”– This way copy all sectors on HDD to SSD. The capacity of SSD should be equal to the capacity of HDD at least. If you choose this way, the three copy options presenting in “Step 4” will disappear.

Step 3. Select your source disk and destination disk.

Select Source Disk Clone System Disk FullSelect Target Disk Clone System Disk Quick

PS.: Check Optimize the performance of SSD to align SSD partitions.

Step 4. Here you can resize partition or leave it alone.

Clone System Disk Without Resizing

Step 5. You’ll return to the main interface. Click Apply and Proceed to begin cloning.

Apply Proceed Clone System Disk Quick

Notices:

  • Do not format your old HDD before booting from cloned SSD successfully.

  • It is allowed to clone MBR to GTP disk or GPT to MBR through AOMEI Partition Assistant Professional.

  • AOMEI Partition Assistant Professional is for Windows PCs; for Windows Servers, use its Server edition.

After transfer all data from HDD to SSD on desktop through cloning via AOMEI Partition Assistant Professional, you can replace HDD without reinstalling Windows and applications. You can abandon HDD or keep it to store data. If you decide to retain your original HDD, you need to enter BIOS to change boot order to boot from cloned SSD in a success.

Conclusion

It’s rather simple to replace HDD with SSD on desktop in Windows 10/8/7 as long as you pick up right SSD and employ an appropriate HDD to SSD cloning software. After equipped with SSD, your desktop definitely owns performance better than before. And you are able take some measures to optimize SSD, thus you can keep SSD at its sharp shape.