[Ultimate Guide] How to Change Laptop SSD And Boot It Successfully

Can I change SSD in laptop?

No matter it is HDD or SSD, insufficient disk space has always plagued each of us. Fortunately, when you receive a low disk space warning, you can replace the old disk with a larger disk to gain more space. The purpose of this tutorial is to show you how to change laptop SSD step by step.

Tips of buying a right SSD

Before figuring out how to change laptop SSD, you need to choose the right SSD for your laptop. Well-known SSD brands include HP, Samsung, Crucial, WD, SanDisk, Toshiba, Seagate, Kingston, and Maxtor. How to buy an SSD mainly depends on the following factors:

✎ Factor 1. Confirm the supported SSD type

SSD is divided into SATA SSD and PCIe SSD, and their connection methods are different. Before buying an SSD, you need to confirm which ports your motherboard supports. If it is a new computer, it is recommended to directly choose NVMe M.2 SSD with PCIe 3.0 protocol. If the M.2 port is not supported, SATA SSD can be selected. Its compatibility is better than NVMe M.2 SSD, but the read and write speed is not as good as NVMe M.2.

✎ Factor 2. Purpose of using SSD

Currently, the mainstream SSD on the market are 256GB, 512GB, 1T, 2T, and 4T. Generally speaking, the larger the SSD capacity of the same brand and the same model, the higher the price. If you buy an SSD as a game disk, it is recommended to choose at least 1T or more. If it is only used as a system disk or for daily office use, 512G is enough.

How to change laptop SSD step by step

Next, we will show you the detailed steps to change laptop SSD. Since the installation methods of SATA SSD and M.2 SSD are different, the tools that need to be prepared are also different. For SATA SSD, you need to prepare cross screwdriver, anti-static gloves, SATA connection cable, hard drive bracket from 2.5 to 3.5 inches. For M.2 SSD, please prepare cross screwdriver, anti-static gloves.

▶ Part 1. How to install SATA SSD on the laptop

Step 1. Turn over the notebook and use a Phillips screwdriver to remove the back cover from the hard drive area.

Step 2. Insert the new SATA SSD into the slot, please note that the location of the SSD disk interface should be consistent with the location of the disk interface in the slot.

Step 3. Replace the hard drive back cover of the laptop.

▶ Part 2. How to install M.2 SSD in laptop

Step 1. Use a screwdriver to remove the laptop back cover.

Step 2. Find the position of the M.2 SSD slot, insert the M.2 SSD into the corresponding interface, and make sure the connection is firm.

Step 3. Fix the screws, and install the rear cover.

How to install SSD in laptop without reinstalling Windows

After changing laptop SSD, you need to reinstall Windows and personal data, which will take a lot of time and effort. In order to avoid such troubles, we can migrate all data on the source disk to the new SSD, including Windows OS.

To do it, you need a reliable cloning software, and AOMEI Partition Assistant Professional is your answer. This powerful tool is compatible with Windows 11, 10, 8, 7, Vista and XP. It can transfer all data from HDD/SSD to SSD without reinstalling Windows, and the target SSD can be booted from the laptop successfully.

★Tip:

Confirm there is no connection issue between SSD and laptop. Then, You need to initialize the SSD if it is new. And set the partition style(MBR or GPT) to be the same as the source disk.

Step 1. Download and install AOMEI Partition Assistant Professional. Click “Clone Disk” in the right menu.

Step 2. Here, you can choose Clone Disk Quickly and click Next.

✦ Clone Disk Quickly means clones the used sectors of the hard drive to another hard drive, so you can clone a larger HDD to a smaller SSD.
✦ Sector-by-Sector Clone means clones the entire HDD to the SSD, including bad sectors.

Step 3. Choose the HDD as the source drive in this step and click Next.

Step 4. And choose SSD as the destination drive. And you can check“Optimize the performance of SSD” and click Next.

Step 5. You can adjust partitions on the SSD or leave it alone.

Step 6. You can preview the operations by viewing the "Pending Operations". Finally, please click "Apply" and "Proceed".

After cloning, install the SSD into the laptop. Then restart the laptop to enter the BIOS settings, and set SSD as the boot drive.

Conclusion

This is the full guide on how to change laptop SSD. No matter which type of SSD, detailed steps are provided here. In addition, AOMEI Partition Assistant also supports only migrating Windows OS to SSD without reinstalling.

Last but not least, if you are running Windows Server, you can switch to AOMEI Partition Assistant Server, which is designed for Windows Server 2022, 2019, 2016, 2012, 2008 users.