“Hey guys. I have a Seagate 3TB external hard drive to store personal data in Windows computer. But all of a sudden, my external hard drive says it needs to be formatted. All I did prior to this happening was restarting my PC as I do every day. So basically, when it is plugged in, every several seconds it disappears and then reappear with a pop-up message: "You need to format the disk in drive F: before you can use it. Do you want to format it?". So what should I do next? Thanks a lot!”
What causes this error?
Actually, this is a widespread problem for Windows users. When you meet such issue, you might also find the hard drive shows as RAW in Disk Management, which will block you from accessing the files on the drive. As for what usually leads to this error, you can refer to:
1. The file system is not recognized by Windows. For instance, file system is Ext 2/3/4.
2. The external drive suffers sudden power outages when it is working.
3. The hard drive is virus infected.
4. The hard drive comes with some bad sectors.
5. The hard drive is removed without safe removal.
How to fix error "you need to format the disk in drive" in Windows 10/8/7?
After getting a basic understanding of why the issue - “my external hard drive says it needs to be formatted” occurs, you must want to know how you can fix it. It’s advisable to take the following measures.
Before proceeding to the methods below, please try the easy solutions first.
> Connect it to another computer or another operating system and check if you can open the hard drive successfully.
> Try another USB port.
> Restart your computer and connect the drive to the computer again.
> Run anti-virus software to check and remove possible virus on the external hard drive.
Sometimes those easy solutions do help people get out of trouble. If the problem still exists, go for the following methods.
Method 1. Use CHKDSK to check errors
You can use Windows inbuilt utility – CHKDSK to fix this error without formatting at first.
Step 1. Search “cmd” in the “Start Menu” and run the “cmd” as administrator.
Step 2. In the pop-up command prompt window, type “chkdsk f:/f” and press “Enter”. (first “f” is the drive letter of the problematic partition).
If CHKDEK can run this process normally and fix the errors, you can access your external hard drive as normal after restarting your computer.
However, sometimes this process is aborted, and the following message pops out: the type of the file system is RAW, CHKDSK is not available for RAW drives. At that moment, you can use AOMEI Partition Assistant Standard to check whether there is bad sector on the external hard drive.
Step 1. Download, install and launch AOMEI Partition Assistant, right click the RAW partition (shown as Unformatted) and select “Advanced”>“Check Partition”.
Step 2. Then select the last method to check whether there is bad sector on the partition, and click “OK”.
Step 3. In this window, click “Start” to begin partition checking process and wait for the process to complete.
Method 2. Recover data and format the external hard drive
If all the methods above don’t solve your problem, reformatting the external hard drive will be the last choice you have to make. But before that, you can use some reliable data recovery software like Recoverit Pro to recover the important data from it since formatting will cause data loss.
To format it, you can directly click “Format disk” and follow the guide in the error message “you need to format the disk in drive” window, but in some cases, you probably receive the formatting error “Windows Was Unable to Complete the Format”.Then, you can also use AOMEI Partition Assistant to format it successfully as below.
Step 1. In the main interface of AOMEI Partition Assistant, right click the disk that needs to be formatted and select “Format Partition”.
Step 2. In this window, you can choose a compatible file system (ex: NTFS) and click “OK” to continue.
Step 3. Click “Apply”> “Proceed” to start formatting the disk.
After formatting, you can see the external hard drive showing normally in Disk Management and you can access data stored in it from File Explorer.
For the issue “my external hard drive says it needs to be formatted” in Windows 10/8/7, the methods above worth your trying. Obviously, AOMEI Partition Assistant is a really powerful software to manage disk. Besides formatting partition, it can help delete/resize/merge/copy partition. If you are a Windows Server user, you can try AOMEI Partition Assistant Server.